I installed a new Hunter ceiling fan in a client’s living room. After ensuring the ceiling box was properly braced, I assembled the fan and mounted it securely. I wired the fan to a Lutron Maestro fan control switch for easy speed and light control. Once installation was complete, I tested the fan’s operation at all speeds and confirmed that the light kit was functioning correctly, providing both air circulation and lighting.

I conducted commercial electrical repairs in a building experiencing intermittent power outages. Using a Klein Tools circuit tracer, I traced the issue to a failing circuit breaker in the main panel. I replaced the faulty Square D breaker with a new one and performed a load test to ensure the system could handle the building’s electrical demands. The repair resolved the power issues, and the office is now operating smoothly.

Completed rewiring of downstairs bathroom and kitchen today. Installed new 12/2 and 14/2 Romex cables for circuits. Replaced outdated receptacles with Leviton GFCI outlets in wet areas. Installed dedicated 20A circuit for kitchen appliances using Square D QO120 breaker. Updated lighting with Lutron Caseta smart switches. Used Klein Tools wire strippers and Ideal wire connectors for terminations. Mounted new plastic junction boxes. Tested all circuits with Fluke 117 multimeter for proper voltage and grounding. Labeled panel clearly. Job completed in 9 hours, bringing wiring up to current code standards.

Repaired a Generac Guardian 22kW whole home generator today. Diagnosed faulty voltage regulator using Fluke 87V multimeter. Replaced with new Generac 0G8442A111 AVR. Changed oil using Mobil 1 5W-30 synthetic and installed new Generac 070185E oil filter. Replaced spark plugs with NGK BPR6ES. Cleaned carburetor using CRC carb cleaner. Adjusted governor spring tension. Tested battery with Midtronics capacitance tester. Performed load bank test using ASCO 1340 portable load bank. Verified proper voltage output and frequency. Updated firmware using GenLink software. Completed repair in 4 hours, restoring reliable backup power.

Performed complete electrical rewire of a home to current NEC standards. Removed outdated knob-and-tube wiring and fuse panel. Installed new 200-amp main service panel with copper feeder wires in rigid conduit. Ran new branch circuits using NM-B cable protected by AFCI/GFCI breakers. Replaced all receptacles, switches and light fixtures. Grounded system to two 8-foot ground rods per 250.53(A)(2). Passed final inspection.

Installed new electrical outlets. Shut off power at the circuit breaker for safety. Ran new wiring from the main panel to the installation points. Installed outlet boxes and secured wiring connections. Mounted and wired the new outlets, ensuring proper grounding and polarity. Tested each outlet for voltage and correct operation. Restored power and confirmed functionality. Client reviewed and approved the installation.

Recently finished installing new lighting fixtures and recessed lighting in a home in Naples, FL. Installed stylish LED pendant lights and recessed lighting from Kichler. The upgrade enhances ambiance and energy efficiency, providing the homeowner with modern, well-lit spaces while reducing electricity costs and maintenance needs.

Installed multiple ceiling fans in Naples, FL, enhancing air circulation. Each Hunter model fan was strategically installed in various rooms for optimal airflow and comfort. This upgrade ensures improved ventilation and energy efficiency throughout the home, promoting a more comfortable living environment.

Installed a whole-home surge protector in Naples, FL, enhancing electrical safety. The Leviton 51120-1 model was professionally installed to safeguard all circuits from power surges. This addition protects electronic devices and appliances, ensuring peace of mind and minimizing potential damage from electrical spikes.

Successfully repaired a Maytag front-loading washer in Naples, FL, addressing drainage issues. Diagnosed and resolved the problem by inspecting the drain pump and removing debris causing the blockage. Checked for any additional issues, ensuring the washer now drains efficiently. The client can now enjoy a fully functional appliance.

Just finalized a whole-home surge protection installation in Naples, FL, offering extensive protection for electrical devices. The client wisely opted for this safeguard against sudden power surges, protecting valuable electronics and appliances from potential damage. With the increased reliability of their electrical system, the customer gains peace of mind, ensuring a secure and resilient home environment.

Addressed a dryer malfunction in Naples, FL, finding a faulty heating element that hindered proper drying. Efficiently replaced the damaged heating element, ensuring will have full use of their dryer again. Additionally, conducted a comprehensive inspection to check for potential issues and guarantee overall performance.

Arrived at a customer's home to repair their electrical panel. I inspected the panel and found a faulty circuit breaker was the cause of the problem. I meticulously installed a new circuit breaker, ensuring the electrical connections were secure upon completion. The electrical panel is functioning properly again for the thankful homeowner.

Went out to install whole-house surge protection in a residential home. I first assessed the home's electrical system to provide the right surge protection devices. I then carefully installed the system in the home. The surge protection will keep the home's electronics and appliances safe and secure. The customer was pleased with the service.

Provided an appliance repair at a customer's home. They had called us because their fridge was not cooling inside properly. Upon arrival, I inspected the fridge and found that the fan motor had gone bad. The old faulty motor was removed and replaced with a new one. The refrigerator is now operating correctly and the new motor is more reliable for the fridge's cooling needs.

Went out to a residential home to install whole house surge protection. Upon arrival, I determined the optimal placement for the surge protectors. The devices were then carefully installed throughout the home. The protectors will protect the home's appliances from power surges and prevent damage. The customer was pleased with the installation.

Went out to a customer's home to install new lights. The residential customer had called us because they wanted string lights hung out on their back patio. Upon my arrival at the home, I measured the outdoor space to ensure proper placement of the supports. I then secured each light to a sturdy support, methodically weaving the lights along until it was completed. The customer was pleased with the new lighting and the ambiance it creates.

Went out to a customer's home to install a new electrical panel. We had come out previously and had noticed the home's appliances were not running at full power, so we had recommended an upgraded panel to provide more power. The new components were meticulously installed to restore the home's electrical system to optimal functionality. The customer was pleased with the service.

Went out to a residental home to replace the lighting in the customer's master bathroom. The customer had wanted brighter and more energy-efficient lighting in the space. The old lights were carefully removed and disposed of before the new LED bulbs were installed. The new lighting will save the customer on utility bills and provide a crisp and vibrant light. The customer was pleased with the service.

Arrived at a customer's home to upgrade their electric panel. The customer had noticed that their appliances were not running at full power and knew they needed a new panel to accomodate for the increased use of electricity in the home. The power was shut off before the old panel was carefully removed and the upgraded one was installed. The new system was then tested to ensure it was working effectively for the home. The customer was pleased with the service.

Call for appliance repair from residential customer. Stove was not receiving enough power. Found that it did not have a dedicated appliance circuit. Installed the circuit and tested to ensure the stove was in working order.

Top rated local electrician repair electrical circuit for residential customer.

Repairwd outlets and loss of power

Repaired mis elabious electri al

Troubleshoot and repair fan